Sanitary 316L Stainless Steel Sheet 2B Finish EN 10204 3.1 MTC Food Grade Plate
Product Details
| Grade: | 316L / 1.4404 | Thickness: | 0.5mm - 12mm |
|---|---|---|---|
| Surface Finish: | 2B, BA, No.4 Sanitary Polish, Ra 0.4 Micron Option | MTC: | EN 10204 3.1 Per Heat Number |
| Molybdenum Content: | 2.0 - 3.0 Percent | Weldability: | Excellent, Low Carbon 0.03 Percent Max |
| Ra Roughness: | 0.4 - 0.8 Micron On Request | Standard: | ASTM A240, EN 10028-7 |
| Highlight |
Sanitary 316L Stainless Sheet,Food Grade 2B Sheet,316L MTC Stainless Plate |
||
Product Description
Dairy, brewery and pharmaceutical fabricators cannot accept a sheet that merely says 316L on the invoice. They need the alloy to be verifiably low carbon, the certificates to match the heat number, and the surface to be free of embedded iron that later becomes a pitting site. This sanitary 316L sheet is supplied against ASTM A240 and EN 10028-7 with a genuine EN 10204 3.1 mill certificate per heat, and each batch is checked for molybdenum content between two and three percent, which is the element that gives 316L its resistance to chlorides and cleaning chemicals.
The standard 2B finish is adequate for internal tank shells, frames and supports, while a No.4 sanitary polish down to Ra 0.4 micron is available where product contact surfaces must resist bacterial adhesion and be fully cleanable. Low carbon chemistry with a maximum of 0.03 percent keeps carbide precipitation away from weld seams, so intergranular corrosion does not start in the heat affected zone of a tank or pipe manifold.
Key Features- Certificate Matched to Heat: Every coil ships with an EN 10204 3.1 mill certificate listing chemistry, mechanicals and heat number, so a QA audit can trace the sheet to the melt.
- Food Contact Compliant: The alloy and finish are compliant with FDA food contact requirements and with the surface roughness limits requested by EHEDG hygienic design guidelines.
- Low Carbon Weld Stability: Carbon capped at 0.03 percent prevents chromium carbide precipitation, keeping weld seams and heat affected zones free from intergranular attack.
- Sanitary Polish Option: Product contact faces can be polished to Ra 0.4 micron, removing the micro crevices where bacteria and cleaning residue collect.
- Chloride and Acid Resistance: Two to three percent molybdenum with 16 to 18 percent chromium resists chlorides, caustic wash cycles, lactic acid and typical CIP chemicals.
- Documentation Pack: Certificate, dimensional report, roughness report and packing list are issued together, matching the documentation set requested in tender packages.
| Parameter | Specification |
|---|---|
| Grade | 316L / 1.4404, UNS S31603 |
| Thickness | 0.5mm to 12mm |
| Standard | ASTM A240, EN 10028-7 |
| Chemistry | Cr 16-18%, Ni 10-14%, Mo 2.0-3.0%, C max 0.03% |
| Surface | 2B cold rolled, BA, No.4 sanitary polish |
| Roughness | Ra 0.4 - 0.8 micron on polished faces |
| Yield Strength | not less than 170 MPa |
| Tensile Strength | not less than 485 MPa |
| Certificate | EN 10204 3.1 MTC per heat number |
Sanitary 316L sheet is used for milk and yoghurt tanks, brewery fermenters, CIP skids, pharmaceutical mixing vessels, food conveyor frames, tablet press enclosures, water treatment housings and marine grade fittings. Because the material is specified by hygienic design teams, orders often combine 2B sheet for structural parts with polished sheet for product contact areas, allowing a fabricator to hold one alloy and one certificate set across an entire skid.
Packaging & Quality AssuranceSheets are filmed on the polished face, interleaved with neutral paper and packed in sealed fumigation-free plywood cases with moisture barrier to prevent condensation staining during sea transport. Before dispatch each batch is verified for chemistry, mechanical properties, thickness tolerance and surface roughness, and the certificate set is scanned and sent ahead so the client engineering team can approve documentation while the container is in transit.
Product Highlights
Dairy, brewery and pharmaceutical fabricators cannot accept a sheet that merely says 316L on the invoice. They need the alloy to be verifiably low carbon, the certificates to match the heat number, and the surface to be free of embedded iron that later becomes a pitting site. This sanitary 316L ...
Cheap Price Hot Rolled Carbon Steel Coil DC01 DX51D 235JR S275JR S355JR A36 5mm Mild Steel Coil
Product Description: Carbon steel coil are made from slabs, which are heated and then rolled into strips by rough rolling mills and finishing rolling mills. The high-temperature steel strip coming out of the finishing mill is cooled to the set temperature by laminar flow and wound into a coil by a ...
Ah36 S235jr S355jr S355j2+N 4x8 Cast Iron Steel Mild Carbon Steel Plates with cheap price
Product Description: Carbon steel plate is a kind of material with a large amount of use, which is divided into ordinary low carbon steel plate and special steel plate, including low alloy high strength steel and corrosion and heat resistant clad steel plate. Ordinary low-carbon steel sheets are ...
Waterwork 45 # 20 # 16mn 42crmo Welded Erw Carbon Steel Pipe Hot Selling
Product Description: The complex chemical and physical properties of the various grades of carbon steel pipe allow for a broad range of service usage. American Piping Products has the right grade, size and price to meet your requirements, including A/SA-106 GRADE B/C and API 5L X-42 thru X-70. A/SA...
JIS Standard Hot Rolled High-Strength Carbon Steel Plate SS400 Q235B Steel Sheet
Product Description: Carbon steel plate is a kind of material with a large amount of use, which is divided into ordinary low carbon steel plate and special steel plate, including low alloy high strength steel and corrosion and heat resistant clad steel plate. Ordinary low-carbon steel sheets are ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
